standard size的例句大全

New, Khaki, 4 hole, standard size, rounded edges suspender buttons.

新建, 卡其色, 四洞, 标准尺寸, 圆边吊杆按钮.

Drag to add a standard-size, editable business card.

通过拖动可添加标准大小的可编辑名片.

Best light angle and adjustable brackets, fits most standard size tanks.

伸缩支架可调节,光照角度更全面, 适合不同尺寸鱼缸.

We will retain the standard size of product unchanged.

我们会保留产品的标准尺寸不变.

Industry standard size and various lead spacing available.

工业生产标准尺寸及多种脚型产品.

The polarity can be reversed, standard size.

极性可反转或变换, 标准尺寸.

Industry standard size, miniature, high density assembly.

按工业标准尺寸生产, 小型化, 组装密度高.

This is the manufacturer's standard size.

这是制造商的标准尺寸.

This is standard size.

这是圭表尺寸.

New, Black in color, 4 hole, standard size, rounded edges suspender buttons.

新建, 黑色, 4孔, 标准大小, 圆边吊杆按钮.

Extremely low leakage current, standard size.

良好的低漏电特性, 标准尺寸.

Dogs up to one inch above or below standard size should be proportionately penalized.

高度误差在一英寸以内的,视其背离标准身高的程度受罚.

The paper was of non-standard size.

这种纸的大小不标准。

Fits the standard size high chairs.

适合标准尺寸的高椅子.

When the little sixteen-millimetre film is blown up to standard size, the image often blurs.

把十六毫米的微型胶卷放大到标准尺寸, 图象常会模糊.

According to the practical application, simplify the standard RTP/ RTCP protocol. Under the premise of no more than the network MTU size, design different encapsulations.

根据实际运用对标准RTP/RTCP协议进行简化，在不超过网络MTU的前提下，对音视频数据设计了独自的RTP封装方式。

Production silicon carbide blocks, sand particle size, powder three series over 100 standard products.

年生产碳化硅块 、 粒度砂 、 微粉三大系列100多个规格产品.

Tantalum chip capacitors standard, miniature size, wide operating temperature, high bility, good frequency characteristic.

片式钽标准品，小体积、宽温、高稳定、频率特性好。

A garment of unusual size. check digit [ International Standard Book Number]

号码超过标准的服装稽核数码〔国际标准书号〕

The independent principle, envelope principle and maximum material principle were given in National Standard of Geometrical Tolerances and Tolerances principles. These three principles show the relation between size tolerance and Geometrical tolerances in drawings.

《形位公差》和《公差原则》国家标准对图样上给出的尺寸公差与形位公差的关系规定了独立原则、包容原则和最大实体原则。